Nitsuko TX Series - Page 26

Operation:
To activate Follow Me (at another extension):
<KTS>
1. Press SPK key.
2. Press ICM key (824/1232/2464 only) (See note 1).
3. Press TRFR key and dial 0.
4. Dial originating extension number (your extension number).
5. Dial option code (0-3) (See note 3).
− One short beep sounds as confirmation.
− One long beep means calls cannot be rerouted to that extension. (824).
− 3 Splash tone means calls cannot be rerouted to that extension (1232/2464).
6. Press SPK key.
<SLT>
1. Lift handset.
2. Dial function code (See note 3).
3. Dial originating extension number (your extension number).
4. Dial option code (0-3) (See note 3).
5. Hang up
Note 1: If program #75-D is 0 (no Tone), skip step 2 (824/1232/2464)
Note 2:
Program #20-D Data Automatic Trunk Access Code for SLT Dial at Step 2
Dial Plan 1 - - 630
Dial Plan 2 0 0 9530
1 9 0530
Note 3: Option codes are as follows:
0 => Follows Me Immediate
1 => Follow Me when Busy
2 => Follow Me Unanswered
3 => Follow Me when Busy/Unanswered
To cancel Follow Me (at originating and destination extension):
<KTS>
1. Press SPK key.
2. Press ICM key (824/1232/2464) (See note 1)
3. Press TRFR key twice.
4. Press SPK key.
<SLT>
1. Lift handset.
2. Dial function code (See note 2).
3. Dial originating extension number (your extension number).
4. Dial option code (0-3) (See note 3)
5. Hang up.