Nitsuko TX Series - Page 77

Operation:
To store text in one-touch key number 1 and 2:
1. Press CHECK and OPAC.
2. Dial message number (00-49).
3. Dial.
4. Edit your own message by Message Edit Mode.
5. Press CHECK.
6. Press One-touch key No.1 or No.2 to store.
7. Dial.
8. Enter message number for next storing.
Or
Press CLEAR to finish.
To store system message (No.10 telephone only):
1. Press CHECK an OPAC.
2. Dial message number (00-49).
3. Dial.
4. Edit message by Message Edit Mode.
5. Press CHECK.
6. Dial message number to store.
7. Dial.
8. Dial message number to next storing.
Or
Press CLEAR to finish.
Related System Data:
Not applicable.


 Broadcasting the Message at Later Time
Description:
Text message can be set to indicate on display telephones in hunt group at
programmed time. If it is set, and time comes, the message will appear on display in 1 minute
with alarm tone.
Station Application:
KTS with LCD