To cancel message at message-originated telephone:
1. Press CHECK and #.
− First message appears on the display.
2. Use to advance and use # to go backwards.
3. Press Hold to cancel message.
Or
Press CLEAR to return to idle condition.
To call back or delete message at message-received telephone:
1. Press CHECK and .
− First message appears on the display.
2. Use to advance and use # to go backwards.
3. Press ICM to call back.
Or
Press HOLD to delete message.
Or
Press CLEAR to return to idle condition.
Related System Data:
Not applicable.
Camp-On Message
Description:
When an extension user makes an intercom call to display phone and receives a busy
signal call can not be connected. This user can send a text message. Intercom Off-Hook
Signalling (#04-C) must be enabled at the called extension.
Station Application:
KTS with LCD
Operation:
To set Camp-On message:
1. Place intercom call. Hear busy tone.
2. Activate Intercom Off-hook Signalling (See Intercom Off-hook Signalling).
3. Press .
4. Dial message number (00-49) and .
Or
Press One-touch key No.1 or No.2 for personal message, then dial .
Or
Press FLASH, edit a message by Message Edit Mode, then press FLASH again and
dial .
To Next Page
Loading...