Nokia NSW-5 Series

NSW-5
Service Software Instructions
PAMS Technical Documentation
Page 46
Issue 1 10/00
 Nokia Mobile Phones Ltd.
Run All button (ALT+A):
User can run all listed tests. The text
RUNNING... is shown in
test state field and test is run. When results are received the
test state field is updated according to the results. When state
field is updated application moves to next test and repeats pre-
vious cycle.
Only last test is not executed (Power off Test) because it will
turn phone power off.
Close (ENTER) button:
Dialog box is closed.
Help button ( Alt+H)
Context sensitive help
Supported Self Tests
The following tests are available:
1 MCU RAM Interface................
2 MCU RAM Component...............
3 MCU EEPROM Interface...............
4 MCU ROM Checksum............
5 MCU EEPROM Component............
6 MCU CCONT Interface.....................
7 Power Off.................
8 MCU CCONT Interrupt...................
9 TXF line........................
A DSP.......................
B MCU EEPROM Checksum...................