NSW-5
Service Software Instructions
PAMS Technical Documentation
Page 59
Issue 1 10/00
Nokia Mobile Phones Ltd.
Dealer
The dealer sub menu offers functions for settings for dealers.
U
ser Settings... command
Activation Status Bar Text
Alt, D,U Open User Setting dialog box
This command is used for reading, storing, and modifying the user set-
tings and values.
After menu selection, the program opens a
query
dialog box: “Read user
settings from phone?”. If you answer Yes, all user settings are read from
the ME including menu settings. If reading fails, an error dialog box is
shown. If reading is OK, the User Settings and Values dialog box is
opened.
The User Settings and Values dialog box contains the following items:
Se
curity ID edit box (ALT+E):
Edit the security code which is saved to the ME memory to-
gether with other user settings and values. Only digits are ac-
cepted for Security code. Length must be 5 digits.
Wake up state:
Select NAM, Bitmap or Animation to be shown after phone
power up:
To Next Page
Loading...
