NSW-5
Disassembly and Troubleshooting Instructions
PAMS Technical Documentation
Page 38
Issue 1 10/00
Nokia Mobile Phones Ltd.
Troubleshooting chats for Transmitter
AMPS TX
Connect an RF–cable to the antenna connector and connect the cable to
a spectrum analyzer input. Start Wintesla–software and set the phone to
Analog mode. Set channel 383 and Powerlevel 2 and measure RF ouput
level. Please notice insertion loss of the cable. It is recommended to use
an external attenuator to avoid overloading the spectrum analyzer.
To Next Page
Loading...
