Nordmann Engineering AT4 D - Effect Light Control; Switching Effect Light On;Off

22
5.2.5 Switching the effect light (Light-2) on and off
Select “Light-2” in the main menu, then press the <Set> key.
In the upcoming modication dialogue you can switch on and off the effect light (Light-2).
Factory setting: Off
Setting range: Off (effect light switched off)
On (effect light switched on)
Main Menu
Fragrance :Set
Light-2 :O
User :Set
Duration :45min
Engineering :Set
Esc Set
Menu Light Start
AT4D 65kg/h 400V3
Steam Bath :Standby
Temperature :34°C
Setpoint :48°C
2011-08-31 12:00:00
Light-2
O
On
O
Esc Set