Nordmann Engineering AT4 D - User Settings Menu; Accessing User Settings; Language and Bath Settings

23
5.3 Unit settings in the user settings menu
5.3.1 Launching the user settings menu
Select the user settings menu:
Path: Main Menu > User > Password entry: 3562 > Settings
The setting parameters appear. Press the < > and < > keys in order to select the individual settings
or settings submenus. Detailed information on the different settings are found in the following chapters.
5.3.2 Selecting the dialogue language
Select “Language” in the unit settings menu, then press the <Set> key.
In the upcoming modication dialogue select the desired dialogue language. After conrmation, the unit
automatically switches to the selected dialogue language.
Factory setting: country specic
Options: diverse languages
5.3.3 Steam bath control settings
Select “BathSettings” in the unit settings menu, then press the <Set> key.
The setting parameter for the steam bath control appear. Press the < > and < > keys in order to select
the individual settings or settings submenus. Detailed information on the different settings are found in
the following chapters.
User Code
3562
Enter Number
Conrm with Set
Esc Set
User
Settings :Set
Modbus :Set
Maintenance :Set
Esc Set
Contrast :15
Time :12:00
Date :11-08-31
Water Manag.:Set
Settings
BathSettings:Set
Cylinder :4564
SC-System :Set
Language :English
Power Limit :100%
Esc Set
Max.DoorOpen:2min
Operat.Range:Set
P-Band :4°C
Control :Int.(P)
BathSettings
Fan :Set
Fragrance :Set
Light :Set
Operation :Panel
Sensor :Set
Esc Set
Language
English
German
French
English
Italian
Esc Set
Settings
BathSettings:Set
Cylinder :4564
SC-System :Set
Language :English
Power Limit :100%
Esc Set
Settings
BathSettings:Set
Cylinder :4564
SC-System :Set
Language :English
Power Limit :100%
Esc Set
Main Menu
Light-2 :O
User :Set
Engineering :Set
Fragrance :Set
Diagnostic :Set
Esc Set
Menu Light Start
AT4D 65kg/h 400V3
Steam Bath :Standby
Temperature :34°C
Setpoint :48°C
2011-08-31 12:00:00