Nordson Encore Series User Manual

Parts
7-13
Part 1612500−02
E 2018 Nordson Corporation
System Options
Part Description Quantity Note
1091429 KIT, input air, Encore manual systems 1
972841
S CONNECTOR, male, 10 mm tube x
1
/
4
in. unithread
1
971102
S CONNECTOR, male, 10 mm tube x
3
/
8
in. unithread
1
973500
S COUPLING, pipe, hydraulic,
1
/
4
in., steel, zinc
1
973520
S COUPLING, pipe, hydraulic,
3
/
8
in., steel, zinc
1
900740
S TUBING, polyurethane, 10 mm, blue
20 ft A
NOTE A: Replacement tubing has a minimum order quantity of 50 ft.
nLightent
nLighten is an LED inspection kit that helps powder coaters improve quality
by effectively illuminating hard to see surface areas. Any imperfection or
missed area is quickly identified and corrected. Find out more at:
nordsoncoating.com/nLighten.
1611977
nLighten
Figure 7-25 LED Inspection Kit

Nordson Encore Series Specifications

General

Maximum Output Voltage	100 kV
Power Source	Electric
Maximum Powder Output	20 lbs/hr (9.07 kg/hr)
Air Consumption	10-15 CFH (4.7-7.1 L/min)
Application	Powder coating
Technology	Electrostatic
Maximum Flow Rate	20 lbs/hr (9.07 kg/hr)
Weight	1.5 lbs (0.68 kg)