Nordson Encore Series User Manual

Table of Contents iii
Part 1612500−02
E 2018 Nordson Corporation
Table of Contents
Safety 1-1..................................................
Introduction 1-1.............................................
Qualified Personnel 1-1......................................
Intended Use 1-1...........................................
Regulations and Approvals 1-1...............................
Personal Safety 1-2.........................................
Fire Safety 1-2.............................................
Grounding 1-3..............................................
Action in the Event of a Malfunction 1-3........................
Disposal 1-3...............................................
System Setup 2-1..........................................
Controller Rail Mounting 2-1..................................
System Connections 2-2.....................................
System Diagram 2-2......................................
System Setup and Connections 2-3...........................
Controller Connections Overview 2-3........................
Spray Gun Connections 2-4...............................
Gun Cable 2-4...........................................
Air Tubing and Powder Hose 2-5...........................
Pump and Hopper Connections 2-6.........................
Connecting the Powder Hose to the Pump 2-8...............
Bundling Tubing and Cable 2-8.............................
System Air Connections 2-8..................................
System Air Supply 2-8....................................
Mobile Systems 2-9....................................
Rail Mount Systems 2-9.................................
System Electrical Connections 2-10............................
Power Supply 2-10........................................
System Ground 2-10.......................................
Controller Configuration 2-10..................................
Power Up Sequence 2-10..................................
Entering Configuration Mode 2-11...........................
Function Settings 2-12.....................................
Exiting Configuration Mode 2-12.............................
Description 3-1.............................................
Introduction 3-1.............................................
Mobile System Components 3-2............................
Rail-Mount System Components 3-2........................
Specifications 3-2...........................................
Mobile System with 50Lb. Feed Hopper 3-2..................
Equipment Labels 3-3.......................................
Powder Spray Gun Certification Label 3-3...................
Controller Certification Label 3-3...........................

Nordson Encore Series Specifications

General

Maximum Output Voltage	100 kV
Power Source	Electric
Maximum Powder Output	20 lbs/hr (9.07 kg/hr)
Air Consumption	10-15 CFH (4.7-7.1 L/min)
Application	Powder coating
Technology	Electrostatic
Maximum Flow Rate	20 lbs/hr (9.07 kg/hr)
Weight	1.5 lbs (0.68 kg)