4.7 CALIBRATION OF TEST TUBES 67
4.8 CALIBRATION OF THE TACTILE PAD 68
4.9 MONITORING EXPIRY OF CALIBRATION DEADLINES 68
5 DENOMINATION AND FUNCTIONS OF THE ELECTRONIC BOARDS 69
5.1 PROCESS CPU 69
5.2 MMI CPU 69
5.3 CL1 BOARD : 69
5.4 CL2 BOARD : 70
5.5 CL3 BOARD : 70
5.6 CL4 BOARD : 70
5.7 CL56F ET CL 56C BOARDS : 70
5.8 STEPPER BOARD: 71
6 SCHEMATIC ELECTRICAL AND ELECTRONIC 71
6.1 INTERCONNECTION SCHEME 71
6.2 SPARES PART LIST 73
6.2.1 PROBES AND THERMOCOUPLES 73
6.2.2 FIRST DROP AND FOLLOWER OPTICAL SENSORS 73
6.3 SCHEME OF ELECTRONIC BOARDS 74
6.3.1 CL1 BOARD 74
6.3.2 CL2 BOARD 76
6.3.3 CL3 BOARD 77
6.3.4 CL4 BOARD 78
6.3.5 CL56 BOARD 79
6.3.6 STEPPER MOTOR BOARD 80
6.3.7 DETECTOR PROBE AND DOOR CLOSED DETECTOR SENSOR 80
6.3.8 FRONT PANEL 81
7 SPARES PART LIST 83
8 TROUBLES SHOOTING 93
9 ANNEXE 1 97
9.1 GUIDE TO UPDATE INSTRUMENT 97
9.2 SAFETY RULES 97
9.3 GENERAL CHARACTERISTICS 97
9.4 CONTENT OF NEW VERSION 97
9.5 HOW TO GET A NEW VERSION 97
9.6 HOW TO KNOW THE SOFTWARE VERSION 98
To Next Page
Loading...