NORMALAB NDI 450 - 3.5 Cooling condenser system

NORMALAB France
2012
N O R M A L A B F r a n c e
32/118
3.5 Cooling condenser system
3.5.1 Replacement or drain of the coolant liquid circuit
Remove the right and rear panels (see above procedure 3.1.1)
Open the cap of the expansion tank
Open the valve to drain
Note: The liquid volume to fill circuit is approximately 250 mL
3.5.2 Replacement of pump
Tools
1 hex head key 3 mm
1 wrench 7 mm
Remove the left and rear panels (see above procedure 3.1.1)
Drain the liquid circuit (see above procedure 3.5.1)
2 assembly types