NORMALAB NDI 450 - Eplace the Touch Screen Controller; Eplacement of Inverter Backlight

NORMALAB France
2012
N O R M A L A B F r a n c e
56/118
3.9.4 Replacement of inverter backlight
Remove the side and rear panels (see above procedure 3.1.1)
Remove the front panel (see above procedure 3.1.2)
Tools
1 screwdriver 2.5 mm
1 tube key 5.5 mm
Remove the connection and remove the inverter
3.9.5 Replace the touch screen controller
Remove the side and rear panels (see above procedure 3.1.1)
Remove the front panel (see above procedure 3.1.2)
Tools
1 screwdriver 2.5 mm
1 tube key 5.5 mm
Remove the connection and remove the
controller