Nortek 2GIG GC2 - Commercial Installation Guidelines

22Copyright©2016NortekSecurity&Control
Commercial Installations
Forcommercialinstallations,theControlPanelisdesignedforuseonlyasaburglaryalarmsystem,andnotforfire
protection.InstallationlocationandwiringmethodsshallbeinaccordancewithANSI/NFPA70:NationalElectricCode,UL
681:InstallationandClassificationofBurglarandHoldupAlarmSystems,andUL827:Central‐StationAlarmServices.
NOTE: WhenusedwiththeAlarm.comservice,thissecuritysystemhasbeenevaluatedandcomplieswithUL1610:Central‐
StationBurglarAlarmUnits.ForcommercialUL1610installations,youmustinstalltheGSM(Cellular)RadioModule.
See
"GSM(Cellular)RadioModule"onpage17.
NOTE: Allentriesandexitswithinacommercialinstallationsetupmustbeprotectedaccordingtothecriteriaprovidedby
UL681:InstallationandClassificationofBurglarandHoldupAlarmSystems.
Figure 20 Commercial Installations