Nortek 2GIG GC2 - System Configuration Screens

Toolbox and Installer Toolbox
Copyright © 2016 Nortek Security & Control 27
NOTE: TheotherbuttonsletyourestorethedefaultControl
Panelsettingsandprovideaccesstoavarietyofsystem
tests.
Figure 31 Installer Toolbox Screen
AftertappingtheSystemConfigurationbutton,thefirst
programmingque stionappears.Tolearnmore,seeSystem
ConfigurationScreens.
System Configuration Screens
UsetheSystemConfigurationscreenstoprogramsensors
intothesystem.Installerscanacce sstheSystem
ConfigurationscreensasdescribedinAccessingtheSystem
ConfigurationforSystemandSensorProgramming.
TheSystemConfigurationscreenspresentinstallerswitha
sequentiallistofprogrammingquestions.Foralistofall
availableprogrammingquestions,
see"Programming
QuestionTable"onpage32.
Figure 32 Q1: Select RF Sensor # (01-48, 63-74).
TIP: Tosimplifyprogramming,questionsarearrangedso
thatcommonlyusedvaluesappearearlyinthequestion
sequence.