Nortek 2GIG GC2 - Additional Buttons

Go!ControlWirelessSecuritySystem|InstallationandProgrammingGuide
30Copyright©2016NortekSecurity&Control
Additional Buttons
Dependingontheprogrammingquestion,additional
buttonsmaybedisplayedonscreen:
•TapEsc(Escape)to“undo”thepreviousaction.This
isusefulwhenyouwanttorestoretheprevious
valueforthequestionorsub‐question.
•TapSum(Summary)torevealasummaryofthe
valuesstoredforthequestionandsub‐options.
•TapEndtorevealasummaryofthevaluesstored
fortheentireControlPanelmemory.
•TapLearntosetthesystemtoreceiveasensor’s
serialnumberduringprogramming.
•TapPastetorepeatthelastsensorserialnumber
entered.
•TapExittoexitingtheprogrammingmodule.
Figure 47 Other Buttons Displayed