Nortek 2GIG GC2 - Page 53

Installer Programming
Copyright © 2016 Nortek Security & Control 51
WirelessTouchScreenKeypads(onlyavailableinsome
regions):
•ForWirelessTouchScreenKeypadstapLearn.The
ControlPaneldisplaysthe“PairwithTS‐1.Initiating
learningprocess.”Tapthekeypad’sPairwithPanel
button.Whencomplete,the keypadandthe
ControlPaneldisplay“Thelearnoperation
succeeded”message.
•TheCon
trolPaneldisplays“RFKeypad(#1‐4)”to
identifythekeypad.
•Thekeypaddisplays“NetworkID:xxxx”whichisits
uniqueserialnumber.
•TapOKonbot
htheControlPanelandtheWireless
TouchScreenKeypadtocontinue.
NOTE: TheWi
relessTouchScreenKeypadwilldisplay“The
securitysystemistemporarilynotoperational”after
learningtheKeypad.Thisisnormal,andwillbe
displayedanytimetheControlPanelisinsystem
configuration(programming)mode.
Q: Select RF Keypad# Equipment Age (0 to 1)
DEFAULT:(0)New
TheCon
trolPanelcanbeusedwithneworexistingRF
keypads.
•IfthisRFKe
ypadisnewfortheinstallation,leave
thedefaultof(0)New.
•IfthisRFKeypadisalreadyinstalled,select(1)
Existing.
Q: Select RF Keypad# Emergency Keys (0 to 1)
DEFAULT:(1)Enabled
NOTE: ThisstepisnotdisplayedforWirelessTouchScreen
keypads.
Standardwir
elesskeypadshave24‐houremergency
buttonslabeledFireandPolice.
•Thede
fault(1)EnabledenablesthisRFKeypad’s
emergencykeys.
•Todis
ablethisRFKeypad’semergencykeys,select
(0)Disabled,thekeyswillnotbeabletotriggeran
alarmorreport.
NOTE: TheRFKe
ypad’sPOLICEbuttontriggersasilent
alarmifprogrammingquestionQ16:PoliceEmergency
Key(0‐2)issetto(2)SilentPanic.See“Q16:Police
EmergencyKe
y(0‐2)”onpage53.
IMPORTANT: Toens
urethatasignalissent,instructthe
endusertotapandholddowntheemergencykeyon
thekeypaduntilitsindicatorlightilluminates.
Q: Construct RF Keypad# Voice Descriptor
DEFAULT:(#)Ke
ypad
ThevoicedescriptoristhewordstheControlPanelwill
announceforthisRFKeypad.Uptofivewordsareallowed.
1 TapInserttoplaceawordfromthevocabularyintothe
dataentryfield.
2 Usethe←or→arrowstoscrollthroughthewords,or
entertheword’s3‐digitindexnumber.
3 TapInsertagainforthenextword.Uptofivewordsare
allowed.
4 Toremoveaword,tapDelete.