Nortel 1140E - Page 76

Configuring the IP Phone 1140E
76
To unpair a wireless headset:
2. Press the Left/Right navigation key to
select the “Use BT Headset” item.
3. Press the Select/Set key to toggle this
option on or off.
A check mark indicates that the wireless
headset is used. Clear the check mark to
use a wired headset. This option is on
(o) by default.
1. Double-press the Headset key to open
the Bluetooth Setup dialog box.
2. Press the Right navigation key to select
the Paired: item.