Why does my Nortel 1140E IP Phone say 'Locked from Login'?
Your Nortel IP Phone might display 'Locked from Login' after three unsuccessful attempts to enter the correct Station Control Password. To resolve this, you can either wait one hour for the lock to clear automatically, or notify your system administrator to clear the lock immediately.
Why does my Nortel 1140E say 'VOUD configured on TN'?
If your Nortel IP Phone displays 'VOUD configured on TN', it means the remote IP Phone does not have VOUA Class of Service. You should notify your system administrator.
How to unlock Nortel IP Phone after too many wrong password attempts?
If your Nortel IP Phone displays 'Locked from Login', it means there were three unsuccessful attempts to enter the correct Station Control Password. You can either wait one hour for the lock to clear automatically, or ask your system administrator to clear the lock.
Why does my Nortel IP Phone say 'Permission Denied (3)'?
If your Nortel IP Phone displays 'Permission Denied (3)', it may be due to an incorrect User ID being entered, so ensure you enter the correct User ID. It could also mean that the remote IP Phone has no Station Control Password, in which case you should notify your system administrator.
Why does my Nortel IP Phone say 'Permission Denied (4)'?
If your Nortel IP Phone displays 'Permission Denied (4)', it could be due to an incorrect User ID being entered. Ensure the correct User ID is used. It can also occur if you're trying to log in to a remote IP Phone 1120E or IP Softphone 2050 from an IP Phone 1140E. Try logging in from an IP Phone 1120E or IP Softphone 2050, or consult your system administrator.
Why does my Nortel IP Phone say 'Permission Denied (6)'?
If your Nortel IP Phone displays 'Permission Denied (6)', it means one of two things: either you entered an incorrect User ID, in which case you should enter the correct User ID, or you entered an incorrect Station Control Password. If it's the password, select Retry and try again with the correct Station Control Password.
What does 'Invalid ID (2)' mean on my Nortel IP Phone?
If your Nortel IP Phone displays 'Invalid ID (2)', it means that you have entered an incorrect User ID. Make sure to enter the correct User ID.
What does 'Invalid ID (3)' mean on my Nortel 1140E?
If your Nortel IP Phone displays 'Invalid ID (3)', it indicates an incorrect User ID was entered. Ensure the correct User ID is entered. It could also mean that the User ID in the Gatekeeper database points to the originating Call Server; if this is the case, notify your system administrator.
What does 'Invalid ID (1)' mean on my Nortel 1140E IP Phone and how to resolve it?
If your Nortel IP Phone displays 'Invalid ID (1)', it means that you've entered an incorrect User ID. Ensure you enter the correct User ID. If the problem persists, the User ID may not be in the Gatekeeper database, and you should notify the system administrator.
Why does my Nortel IP Phone say 'Server Unreachable (2)'?
If your Nortel IP Phone displays 'Server Unreachable (2)', it indicates a network problem. Notify your system administrator if the problem continues.
General| Display Color | Monochrome |
|---|---|
| Lines | 6 |
| Speakerphone | Yes |
| Protocols | SIP, H.323 |
| Volume Controls | Yes |
| Wall Mountable | Yes |
| Display | Backlit LCD |
| Audio | Wideband audio |
| Ethernet Ports | 2 |
| Power over Ethernet | Yes (IEEE 802.3af) |
| Headset Support | Yes |
| Supported Codecs | G.711, G.729, G.722 |
Details the fundamental capabilities and components of the IP Phone 1140E.
Outlines the security measures, including login and password protection.
Describes the soft keys available when the phone is in its idle state.
Explains the soft keys available during an active phone call.
Details the steps for physically connecting all necessary cables and parts.
Explains how to input text and characters using the phone's dialpad.
Guides users through the process of logging into the IP Phone.
Explains how to set or change the network domain for phone connectivity.
Details the steps for entering user credentials to log in.
Guides users on how to properly log out of the IP Phone.
Guides on pairing and managing Bluetooth headsets with the IP Phone.
Explains how to make calls by lifting the handset or using headset/handsfree first.
Details how to dial a number before lifting the handset.
Explains how to use the speakerphone function for calls.
Guides on how to accept an incoming call using various methods.
Explains how to make calls directly from the address book.
Details the process of adding new contacts to the phone's directory.
Guides on how to open and view the call inbox.
Explains how to make a call directly from a call inbox entry.
Guides on how to create and send instant messages.
Explains how to initiate another call while on an existing one.
Details using the Action key to start a new call during an active call.
Guides on how to put an active call on hold.
Explains handling multiple calls simultaneously on hold.
Details how to combine three calls into a single conference call.
Explains how to set up a multi-party conference call.
Guides on how to redirect a call to another number or person.
Explains how to temporarily park a call for later retrieval.
Guides on how to retrieve a call that was previously parked.
Explains how to configure programmable feature keys.
Guides on assigning a feature key for quick dialing.
Guides on assigning a feature key to activate call forwarding.
Guides on assigning a feature key to enable Do Not Disturb.
Explains how to redirect incoming calls to another number or destination.
Guides on how to activate the feature to block all incoming calls.
Explains how to set and display your availability status to others.
Explains how to check for and install firmware updates.
Details how to perform a factory reset on the IP Phone.
Explains how to delete user-specific files and settings.
To Next Page