3-1
BMC II BISYNC Operation, Administration, and Maintenance Guide BMCB001 and up
3-
3
3
3
3
Section 060-INDP-310
System Administration Guide
General Information
The purpose of this section is to present general information concerning
assignment of site-dependent data, system parameters, files management and
security related issues for the BMC. This section provides examples for use
in the definition of system requirements.
System administration consists of review and definition of the operating
characteristics of the BMC. BMC issues and operating parameters depend on
the following:
• Site (Telephone Company location).
• Switching System type with which the BMC is used.
• Initial setup and testing of system files.
• Security.
Site data refers to the review and definition of the operating requirements of
the Telephone Company site. Switching System specific information defines
how call records are received and polled. Setup and testing of system files
assures the site data for the site is available. Security relates to the ability to
control access to the commands and functions of the BMC.
DMS-10 Switching System specific data is discussed in the DMS-10 Switch
Specific Data section. DMS-100 Switching System specific data is discussed
in the DMS-100 Switch Specific Data section. Installation is covered in the
Installation Methods (IMs) listed in the About this Document section:
Levels of Operation
The use, support, and control of the BMC can be broken down into four major
tasks:
• System administration
• Maintenance
13
To Next Page
Loading...
Need help?
General
