Nortel DMS-10 Series User Manual

6-198 Section 060-INDP-610 Maintenance Procedures Guide
297-6201-502 Standard 01.02 September 2000
Figure 3-1
Bus Terminator PCA options (NT6M68AA)
Four-Channel Communication PCA replacement (NT6M85AA)
To replace the Four-Channel Communication PCA, use the following
procedure. Refer to Table 6-24 and Figure 6-24 for a description of the
switch and jumper options on this PCA.
Procedure 6-46
Four-Channel Communication PCA replacement (NT6M85AA)
Step Description
CAUTION
Since all BMC PCAs are static sensitive, be careful when handling them.
Wear a wrist grounding strap when working with the BMC.
WARNING
Since the BMC is powered up during this procedure, observe all safety
procedures for operations on live equipment.
(Sheet 1 of 3)

Nortel DMS-10 Series Specifications

General

Brand	Nortel
Model	DMS-10 Series
Category	Telephone System
Language	English