Notifier

ID50 User Manual

ID50 Series Panel - Installation, Commissioning & Configuration Manual
Contents
i 997-263, Issue 4
September 2002
Contents
1 Introduction 1
1.1 Manual Purpose 1
1.2 System Design and Planning 1
1.3 General 2
1.3.1 Date-dependent Functions 2
1.4 CE Marking 3
1.5 EN54 Functions 3
1.6 Ancillary Functions 4
1.7 Related Documents 5
1.8 Warnings and Cautions 5
1.9 Tips 5
1.10 Glossary of Icons 6
2 Installation Guide 7
2.1 How to Use this Section 7
2.2 Pre-Installation Check List 7
2.1.1 Some Panel DOs and DONTs 7
2.3 Transient Protection 8
2.4 Product Inspection 9
2.4.1 Checking Your Panel for Damage 9
2.4.2 What to do if Panel is Damaged
or Suspect 10
2.5 Dismantling the Panel 11
2.5.1 Removing the Cover 11
2.5.2 Removing the Panel Electronics 12
2.5.3 Back Box Fixing 13
2.5.4 Semi-Flush Mounting Bezel (Optional) 14
2.6 Assembling the Panel 15
2.7 RS485 Communications Link 16
2.7.1 Fitting the RS485 Interface Module PCB 17
2.8 RS232 Interface Connections 18
3 Cabling 19
3.1 Cabling Instructions 19
3.1.1 Cable Terminations 20
3.2 Cabling Installation Notes 21
3.2.1 Introduction 21
3.2.2 Quality of Cable and of Cable Installation 21
3.3 EMC Considerations 22

Notifier

ID50 Specifications

General

Brand	Notifier
Model	 ID50
Category	Fire Alarms
Language	English