NOVA chat User’s Guide Page 114
Configuring Visual Effects for Scanning
Visual effects are used with scanning to help the user identify selected
items. To access the visual effects settings, choose Menu > Settings >
Input > Visual Effects.
Effect Description
Outline When Outline is turned on, an outline appears
around the active area.
Outline Color When Outline is turned on, Outline Color
allows you to set the color of the outline.
Outline Width When Outline is turned on, Outline Width
allows you to set the width of the outline.
Translucent
Overlay
When Translucent Overlay is turned on, a
subtle trace of color appears over the active
area.
Overlay Opacity When Overlay is turned on, Overlay Opacity
allows you to set how clearly the underlying
image shows through the overlay. To allow
less of the underlying image to show through,
tap +. To allow more of the underlying image
to show through, tap –. Then choose OK.
Overlay Color When Overlay is turned on, Overlay Color allows
you to set the color of the overlay. Tap a color in
the color selection window. The selected color
appears in the circle to the right of Overlay
Color.
Invert Colors When Invert Colors is turned on, the colors of
the active area are reversed. Dark areas
become light, light areas become dark, and
colors are replaced by their opposites—black
and white are reversed, red becomes green,
yellow becomes blue, etc.
To Next Page
Loading...