NuWave BRIO 6Q - Assembly Guide; Assembling the Unit; Removing Tray & Basket; Assembling Basket Net

assembly guide
16
ASSEMBLY GUIDE
16
Assembling the Brio
CAUTION: DO NOT use the Brio without the Base Tray
and Fry Pan Basket with Net. DO NOT touch the insides of
the Base Tray, Fry Pan Basket, and Net immediately after
cooking. Parts will be hot. ONLY hold the Base Tray and Fry
Pan Basket by the handle.
Removing Base Tray with Fry Pan Basket
1. Using the handle, pull and slide out the Base Tray and
Fry Pan Basket with Net. (See Fig. 1.)
2. To remove Fry Pan Basket from Base Tray, while holding
the handle, push demounting button forward and lift
up Fry Pan Basket from Base Tray. (See Fig. 2.) When
cooking, this will reduce extra weight from Base Tray
and make it easier to pour or shake smaller foods.
Fry Pan
Basket
Demounting
Button
Base Tray
1
2
Basket Net
Fry Pan
Basket
Base Tray
Removing the Fry Pan Basket Net:
1. After removing Fry Pan Basket from Base Tray, turn Fry
Pan Basket upside down.
2. Using oven mitts, press the underneath of the Fry Pan
Basket Net down until it is released from Fry Pan Basket.
Net and its tab will be released from Fry Pan Basket.
Assembling the Fry Pan
Basket Net
1. Place Tab of Fry Pan
Basket Net into slot of Fry
Pan Basket. (See Fig. 3.)
2. Press other end of Fry Pan
Basket Net down until Net
snaps into place and is at
inside Fry Pan Basket.
3
Basket
Net
Tab