NuWave BRIO 6Q - Cleaning & Maintenance; Cleaning Procedures; Storage Guidelines

cleaning & maintenance
74
CLEANING & MAINTENANCE
74
CLEANING & MAINTENANCE
Cleaning
Clean the Brio after every use or in between a number of
large batches. The Fry Pan Basket and the Base Tray have
a non-stick coating with a stainless steel Basket Net. Do not
use metal utensils or harsh abrasives when cleaning as this
can damage the coating.
1. Unplug the appliance and make sure it cools completely.
2. Use a damp cloth to wipe the outside of the appliance.
3. Clean the Fry Pan Basket and inside components with a
nonabrasive sponge, hot water, and mild detergent.
Note: Remove the Base Tray and Fry Pan Basket and place
on a heat-resistant surface to help cool the appliance quicker.
Note: If using the dishwasher for the Base Tray, Fry Pan
Basket, and Fry Pan Basket Net, it is recommended to use
top rack only.
Tip: If there is residual food in the Base Tray and Fry Pan
Basket, add some hot water and let it soak separately for
about 10 minutes for easier cleaning. Then, use a soft
cleaning brush to remove any lingering food.
Note: To clean Probe, wipe end with a damp cloth or paper towel.
Storage:
1. Unplug the Brio and let it cool down completely.
2. Make sure that all the parts are clean and dry.
3. Push the power cord into the storing capsule. Afx the
cord by inserting it into the cord-afxing opening in the
back of the unit.
IMPORTANT - Do not immerse unit
in water or attempt to cycle through
dishwasher. The outer surface may
be cleaned by wiping carefully with
a damp dishcloth or sponge.
Make sure unit has cooled
completely prior to cleaning.
WARNING
In case of other problems, immediately unplug
and contact Customer Service Department.
1-877-689-2838 • help@nuwavenow.com