nuwavenow.com
19
ENGLISH
nuwavenow.com
19
PROBE: Use the PROBE button to set the Digital
Temperature Probe’s target temperature as-well-as to view
the foods internal temperature during cooking. Use the [↑]
and [↓] buttons to adjust the Digital Temperature Probe
target temperature.
Order of Cooking Sequence:
1. Delay
2. Preheat
3. Sear 1
4. Stage 1~5 / Program / Probe
5. Sear 2
6. Warm
FUNCTION USES
Plug the power cord into an electrical outlet. Press the ON/
OFF button to turn the unit on. The LED display will show
360F and TEMP.
ON/OFF
1. Press the ON/OFF button to turn the unit on and off.
Once turned on the LED display will show the default
cooking temperature (360F) and the word temp.
2. The temperature can be adjusted up or down by
using the [↑] and [↓] buttons above and below the
temperature icon.
3. The default cooking time is 15-minutes. To adjust the
cooking time, press the [↑] and [↓] buttons above and
below the time icon.
4. Press the START/PAUSE button to begin cooking.
Note: Before setting any other cooking function, set the
regular stage 1 cooking temperature and time. Stage
cooking is explained in the STAGE section of these
Operating Instructions.
START/PAUSE
1. Press the START/PAUSE button to begin cooking. The
“:” will ash indicating the unit is now cooking.
2. To pause cooking, press the START/PAUSE button or
simply remove the Fry Pan Basket with Base Tray. The
“:” will no longer ash indicating the unit is now paused
and the LED display will show open.
To Next Page
Loading...
