nuwavenow.com
77
ENGLISH
nuwavenow.com
77
Error Message: Solution(s):
Prb1
Probe not connected to the unit. Plug
the Brio into the appropriate
power socket.
Prb2
The Probe target internal temperature is
set higher than set cooking temperature.
Prb3
Probe short Circuit.
Contact Customer Service Department
at 1-877-689-2838 or help@
nuwavenow.com.
Prb4
Probe sensor not detecting temperature
increase. Ensure the Probe is inserted
into the food and the food is in oven
during cooking.
Err1
NTC Temperature Sensor overheated.
Turn unit off to cool. If the Brio is not
working after it cools down, contact
Customer Service.
Err1
NTC Temperature Sensor short circuit.
Contact Customer Service Department
at 1-877-689-2838 or
help@nuwavenow.com.
Err2
NTC Temperature Sensor is open.
Contact Customer Service Department
at 1-877-689-2838 or
help@nuwavenow.com.
To Next Page
Loading...
