177
11
Settings
GPS
Under the Programs tab, you can choose the port that your phone will use to obtain GPS
data.
Under the Hardware tab, you can specify the hardware port to which your GPS device is
connected. Settings include GPS hardware port and Baud rate.
Under the Access tab, you can activate Manage GPS automatically. You are strongly
advised to activate this feature; doing so will enable Windows Mobile to manage access to
your GPS device, and allows multiple programs to obtain GPS data simultaneously.
Memory
You may need to stop a program if it becomes unstable or the program memory is low. Tap
Start > Settings > the System tab > Memory.
• The Main tab displays the amount of memory the system has allocated to file and data
storage versus program storage. This tab also displays the amount of memory in use
versus the available memory.
• The Memory Card tab displays how much memory is available on the storage card that is
inserted into your device.
• The Running Programs tab displays the list of currently active programs. You can stop a
program by selecting it in the list and then tapping Stop, or just tap Stop All to stop all the
running programs.
You may need to stop a program if it becomes unstable or the program memory is low.
Power
Tap Start > Settings > the System tab > Power.
• The Battery tab displays the amount of battery power remaining. Battery power depends
on the battery type and how the device is being used.
• On the Advanced tab, you can select options for turning off your device to conserve
battery power.
To Next Page
Loading...
Need help?
General
