180
12
Managing your Xda Atom
12. Managing your Xda Atom
12.1 Self Diagnostics
You can perform self-diagnostics to see if there is any hardware malfunction. You can
selectively test part of the items.
There are two test options: You can tap Menu to select all test items and tap run to start a
comprehensive testing. Or you can select the desired testing items by checking the boxes.
12.2 Auto-Configurator
This application provides a user-friendly
way to set up operator specific settings,
including GPRS, WAP, and MMS.
The auto configuration process can be performed as soon as the SIM card is accessible. It is
activated via 2 ways.
1. During every cold/warm boot, the operator ID obtained from the SIM card will be compared
with the current setting. If they don’t match, a dialog box will ask you if you want to perform
network configuration now. Once confirmed, the auto-configurator will be launched to
configure your device to the current preferred network.
2. When auto-configurator is launched via the Programs menu, the same detection process
will be carried out and the possible selections will be listed in the preferred network.
Please note
The Auto Configuration process is started only when the device is in HOME network (not
international roaming).
To Next Page
Loading...
Need help?
General
