26
2
Getting started
2. Getting started
Before start using your Xda Atom, you need
a fully charged battery and a valid SIM card.
2.1 Insert the battery &
SIM card
1. Look at the back of your Xda Atom.
Gently press down and slide out the rear
cover in the direction shown below.
2. Hook and lift the battery upward as
shown below in order to remove it.
3. Unlock the SIM card holder by pushing
it to the right and lifting it up Insert the
SIM card with the metallic part facing
down and the clipped corner in the right
direction.
4. Gently press down the SIM card holder
and lock it by pushing to the left. Make
sure the holder does not bounce back
upwards.
5. Insert the battery and rear cover back
accordingly by reversing the above Steps
2 and 1.
To Next Page
Loading...
