68
5
Basic phone functions
By memorizing a number’s position in the
Speed Dial list, you can dial the number by
pressing and holding its position number. By
default, the Location function will give you
the next available position in the Speed Dial
setting screen. If you want to put a number
in a position that is already occupied, the
new number will replace the number already
there.
Please note
To delete a Speed Dial entry, go to
the Speed Dial list, tap and hold the
contact name in the box to the right of
the assigned speed dial number, and
then tap Delete.
Checking your Voice Mail
By default, the first Speed Dial location
is your voice mailbox. When you insert
your SIM card into your Xda Atom, it will
automatically detect and set, by default,
the voice mailbox number of your network
operator.
On the Phone Dialer screen, tap Speed Dial
and select Voice Mail, and then press
or tap Call to call the voice mail centre.
5.2 Ending a call
Once an incoming or outgoing call is in
progress, you can press the , or tap
End on the Phone Dialer screen to hang up.
Please note
Alternatively, press the silver button on
the wired stereo headset to end a call.
5.3 Receiving/Ignoring a
call
When you receive a phone call, a notification
message will appear.
To answer the incoming call, tap Answer, or
press the
.
To ignore or reject a call, tap Ignore or press
to mute the phone and reject the call.
This may divert the call to your voice mail,
depending on your network operator.
Please note
Alternatively, press the silver button on
the wired stereo headset to receive a
call. Please see 5.6 In-call options.
5.4 International calls
When you make an international call from
any country, you need to insert a special
international access code. If you enter the
“+” symbol as a prefix before the number you
are calling, then you do not need to enter the
access code for the country you are calling
from.
To make an international call:
1. Tap and hold the 0 key until the + sign
appears. The + replaces the international
prefix of the country that you are calling
from.
2. Enter the full phone number you want to
dial. It should include the country code,
area code (without the leading zero), and
phone number.
3. Tap Talk or press the
.
To Next Page
Loading...
Need help?
General
