10 Conducting the Examination with a Computer/Laptop
42 / 86 Instruction Manual Mesotest II (G/62800/0715/en)
10.4.2 Conduct the Programm "Mesopic vision mono"
With the examination program „Mesopic vision mono“ (optional with
Mesotest II konkav), you can examine mesopic vision monocularly, for the
right and for the left eye, at different contrast levels, with and without
glare. It consists of 20 test steps.
Test 1, 6, 11 and 16: Facilitate the fixation, as here the fixation marks are
displayed
Test 2-5 and 12-15: Are used to test mesopic vision
Test 7-10 and 17-20: Are used to test mesopic vision with glare.
Enter a visual aid
If the patient wears glasses or contact lenses, the examination is
conducted with the glasses or contact lenses.
Enter whether the patient wears visual aids (including any tinting,
etc.), sec. 10.1.1, page 29.
1 Header with information about the patient and
“vision aid” selection field.
5 Task bar with the buttons [Back] and [Result], as well
as minus lenses for myopia test (Mesotest II konkav)
2 Optotype display 6 Arrow keys for steps: “back” and “next”
3 Input field “Comment” 7 Display the exam programme with test steps
4 Button: Change Landolt ring position
Fig. 10-18: Examination menu
To Next Page
Loading...
