OCULUS Mesotest II - Change the Lamp at the Panel Illumination

13 Cleaning, Disinfection and Maintenance
Instruction Manual Mesotest II (G/62800/0715/en) 73 / 86
13.4.3 Change the Lamp at the Panel Illumination
You can change a faulty lamp.
Note:
Risk of functional damage caused by wrong lamp.
 Use only genuine lamps from Oculus. Order number 016280006004.
 The bulb is changed together with the plastic holder, which also acts
as a glare shield.
 Simply pull the lamp up and remove it.
 Insert the lamp.
When inserting the new lamp, take care not to bend the pins
(connecting wires) of the bulb.
 Push the lamp into its fixture.
Fig. 13-6: Changing the lamp