OCULUS Mesotest II - Patient Data Management; Rename Patient Data

12 Patient Data Management
52 / 86 Instruction Manual Mesotest II (G/62800/0715/en)
 Press the [Edit] button.
 Proceed as described in sec. 11.2, page 48.
If you select a preset (default) examination programme, the buttons [Edit]
and [Delete] are not displayed.
Proceed as follows.
 Press the [Copy] button.
The examination programme is copied and is displayed with the suf-
fix “Copy” at the end of the list of programmes.
The buttons [Edit] and [Delete] appear.
 Press the [Edit] button.
 Proceed as described in sec. 11.2, page 48.
12 Patient Data Management
You can do the following to the patient data
 rename, sec. 12.1, page 52
 export, sec. 12.2, page 53
 import, sec. 12.3, page 54
 save, sec. 12.4, page 55
You can also change the Patient Data Management settings, sec. 12.5,
page 57.
12.1 Rename Patient Data
Patient data can be changed retroactively after it has been added.
 Press the [Change] button.
The input boxes for patient data are now enabled, and the cursor
jumps to the "Last name" field.
 Change the entries in the individual boxes.
 Press the [Save] button.