OERTLI OS 4 - Overview of Laser Service and Maintenance

2021-03-23 / Rev. 10 VV016042 32
9.6 Overview of laser service and maintenance
Start
Maintenance and repair
(first level)
Output power
within specification on
connector (3) ?
( 19)
Fill out report (19)
Measured output
power at laser unit within
specification?
Prepare laser as stand
alone unit and directly
measure at the laser
module ( 9.7.1)
Replace fibre ( 11.3.4)
Calibrate laser ( 9.7.3)
Measured output power
within specification?
Fill out report (19)
Contact
Oertli Instrumente AG
End
End
yes
yes
yes
no
no
no