5281
p. 3/3
In case of special application conditions,
please consult for advice.
We reserve the right to make technical changes without notice.
© Christian Bürkert GmbH & Co. KG 0802/3_US-en_1000082430
1 Coil: Polyamide
1)
Epoxy
2)
2 Plunger: 1.4105
3 Plunger-seal: NBR, EPDM, FKM
4 O-rings: NBR, EPDM, FKM
5 Cover: Brass
6 Spring: 1.4310
7 Diaphragm: NBR, EPDM, FKM
8 Valve body: Brass
1)
with NBR-sealing
2)
with EPDM-, FPM-sealing
Materials
Ordering chart for accessory
Cable plug Type 2508 according to DIN EN 175301-803 Form A
Circuitry
Voltage /
frequency
Item no.
None (standard) 0 - 250 V AC/DC 008 376
further versions see datasheet Type 2508
The delivery of a cable plug includes the at seal and the xing screw. For other cable plug versions acc. to DIN EN
175301-803 Form A (previously DIN 43650), see separate datasheet Type 2508.
Flat seal
Fixing screw
Approvals
UL/UR/CSA, ATEX-Ex, UL-re protection, European gas approval
Voltage
110/50, other non-standard voltages
Port connection
NPT, Rc
Further versions on request
i
To Next Page
Loading...
