Olympia Millennium-E - Snow Conveyor (Auger); Hydraulic Components

The Ultimate Ice Resurfacer 30
Body Panels
All panels are made of glass bre-reinforced plastic (GRP).
4.2 Snow Conveyor (Auger)
The horizontal auger in the conditioner transports the snow that has been scraped o the ice
by the blade to the centre of the conditioner, where it is picked up by a vertical auger and
is transported into the OLYMPIA’S snow dump tank. To switch on the horizontal and vertical
augers, press the switch ELEVATOR ON on the dashboard.
Directional Control Switch for the elevator:
• This switch has three possible positions.
• Turning the switch to the left turns the elevator FORWARD (self- locking).
• The middle position is OFF.
• Turning the switch to the right turns the elevator REVERSE (turn and hold switch).
4.3 Hydraulic Components
A tandem hydraulic pump supplies the hydraulic system with oil. Control valves supply the
ice resurfacer with oil for the operation of a series of control valves for movement control,
and control of the ow of hydraulic uid to the various components as needed. The hydraulic
system must only be serviced by qualied personnel.