The Ultimate Ice Resurfacer 84
• Clean the entire ice resurfacer thoroughly with a damp cloth.
• Water the batteries using only distilled or RO. treated water.
Never spray an open jet of water into the ice resurfacer, as electrical components will be
damaged.
8.2.3 After 5 Hours
• Check and torque the lug nuts to 140 (Nm) 103.25 ft·lb.
8.2.4 After 50 Hours
• Check all drive belts (vee-belts) and re- tension them, if necessary (Refer to Chapter 9.1).
• First oil change on the wheel drive gear boxes (using Dexron III).