The Ultimate Ice Resurfacer 85
8.2.5 Monthly
• Have the battery voltage measured and battery acid density checked by a battery
specialist. Add distilled water, if necessary.
• Check whether the battery box is dry.
• Inspect the hydraulic system for any sign of leaks.
• Check the belt tension at all drive belts.
• Check the tire pressure (85 psi or 5.8 bar).
• Check that all lug nuts are tight (140 Nm).
• Check all traction drives for leaks.
• Check that the parking brake cable runs smoothly, re- lubricate it with penetrating oil, if
necessary.
• Check the hydraulic oil level in the hydraulic tank.
• Check that the board guide roller runs smoothly.
• Check the surface of the blade holder in the conditioner and lightly oil it.
• Briey test all functions.
• Check the tension of the conditioner drive chain, it should not have more than ½ inch (1,27
cm) of play.
• Spray lubricant onto the conditioner drive chain.
To Next Page
Loading...
