Olympia Millennium-E - Ice Making Water Filling Procedure

The Ultimate Ice Resurfacer 68
6.6.1 Ice Making Water Filling Procedure
1. To ll the ice making water tank, insert the hot water hose into the lling inlet (Item 1)
on the left hand side of the OLYMPIA.
2. Plug the solenoid valve plug into the socket on the Ice making water ll station (Item 2).
3. Select whether you want to half-ll or completely ll the tank.
4. When the switch is turned, the water begins to ow until the previously selected water
level is reached and the system shuts itself o automatically.
5. Return the switch to the OFF position, pull out the solenoid valve plug and remove the
hose from the lling inlet.
2.
1.