The Ultimate Ice Resurfacer 10
1.8 Operator’s Workplace
Operation of the ice resurfacer is done solely from the driver’s seat on the driver’s platform.
Before doing any jobs of longer duration on moving parts, switch o the power and
depressurise the systems at the vehicle and take suitable measures to prevent it from being
switched back on again.
Turn the key switch to the OFF position and remove the key; switch o the emergency stop
switch and pull the battery plug.
1.9 Safety Devices and Guards
Operator Presence switch at the driver’s seat
There is an Operator Presence switch at the driver’s seat on the OLYMPIA that must not be
bypassed. When the driver leaves the seat, the ice resurfacer is stopped after a delay of 8
seconds, so that the OLYMPIA cannot be operated without the driver in the seat.
To Next Page
Loading...
