The Ultimate Ice Resurfacer 67
6.5 Spreader Cloth Installation
1. Install the towel on the backside of the towel bar with the 3/8” hex head bolts and
locknuts, making sure the nuts are on the towel side of the towel bar.
2. Place the towel bar assembly onto the towel lift guides.
3. Attach towel lift chains between the towel bar and towel lift arm.
6.6 Water Filling Procedure
Always ll the ice making water tank with hot water, always ll the wash water tank with
cold water.
Never leave the OLYMPIA unattended during the water lling procedure.
To Next Page
Loading...
