The Ultimate Ice Resurfacer 40
Item 17 Gear Shift Lever
Unless moving the ice resurfacer, always make sure the gear shift
selector is in the neutral position. To move the ice resurfacer forward
move the gear shift selector to the forward position. To reverse the ice
resurfacer, move the gear shift selector to the reverse position.
F = Forwards
N = Neutral
R = Reverse
Always move the gearshift selector to the centre position (neutral position) before you
leave the driver’s platform.
If the lever is not in the neutral position when the ignition key is turned on, the drive control
will be disabled until the gear shift selector is switched back to the centre position.
Make sure the ice resurfacer comes to a complete stop before changing gears.
Item 18 Ignition Key
Turn the ignition key to the right or ON position to switch on the ice
resurfacer and put it into operation.
Turn the ignition key to the left or OFF position to switch it o again.
The ice resurfacer can be switched o with the EMERGENCY SHUT OFF
(Fig. 5.1) at any time.
When the ice resurfacer is switched o, all functions are shut down,
except for the automatic water ll stations.
To Next Page
Loading...
