28
6
Setting AE lock
7
Show/Hide control window
8
Shutdown and Sleep
With AE (Auto Exposure), when observing the specimen where
observation objects are scattered, the exposure time may be increased/
decreased to allow the live image brighter or darker in association with
stage operation. In this case, enable AE lock to observe specimens
with the constant brightness.
Select the [Controller] tab
a
.
Press the [AE lock] button
b
to select Fix or Cancel the exposure time.
} When AE lock is enabled, the AE area and the ISO sensitivity cannot
be changed and the exposure time cannot be compensated.
When Auto exposure mode is selected:
1
Operate with the
a
button.
Button Function
The control window is hidden.
The control window is shown again.
(Upper right area of the display)
1
Operate with the
a
button.
Button Function
The system is terminated and the main switch of the
control box of DP2-SAL is turned OFF.
DP2-SAL is in sleep status (operations are paused). If you
click the mouse or touch the touch panel display, DP2-SAL
resumes operations immediately.
1
b
a
a
a
To Next Page
Loading...
