84
DP2-SAL can access to PC on the network by connecting control box
D2-CB to LAN.
The settings changed by this operation won't be returned
to factory default settings. The malfunctions or damages
caused by changing the settings are subject to the paid
repair.
} The network must be set by the network administrator.
} The keyboard and the mouse must be connected for setting the
network.
Following operations are available by setting the network.
· The acquired images can be saved directly to PC on the network.
· The acquired images saved to PC on the network can be played
by DP2-SAL. (The images you can play are only those acquired
with DP22/DP27 However, if DP22 is connected, the 2448 x 1920
image (acquirable with DP27) cannot be played. Also, you may
not be able to play images acquired with DP22/DP27 if they are
edited by the PC, etc.)
Connect the LAN cable to the control box D2-CB. For procedures to
connect LAN cables, refer to "LAN Connection (P. 21)".
} If the LAN cable is not connected, settings of the network are not
reflected to the control box DP2-CB.
While the camera control software is running and also the live
image or the acquired image is displayed, press [Ctrl]+[Alt]+[Insert] of
the keyboard.
The message shown on the left appears. Confirm the content and
press the [OK] button
a
.
When settings are changed, the control box D2-CB
restarts automatically. It takes several minutes until the
restart completes. Do not turn OFF the main switch or
unplug the AC adapter until the restart completes.
The control box D2-CB restarts and the Windows
®
desktop is displayed.
1
2
3
6
Setting network
a
To Next Page
Loading...
Need help?
General
