DP2-SAL
85
Double-click the icon on the desktop to set the network or the file
sharing, etc. Set items according to your connection environment.
For details, consult with the network administrator.
Icon Function
The control panel starts.
The command prompt
starts.
} The functions of Windows
®
installed on the control box D2-CB are
limited specially for this system.
When the network connection is completed, double-click the [Camera]
icon on the desktop.
Icon Function
The camera control software
starts.
The message shown on the left appears. Confirm the content and
press the [OK] button
b
.
When settings are changed, the control box D2-CB
restarts automatically. It takes several minutes until the
restart completes. Do not turn OFF the main switch or
unplug the AC adapter until the restart completes.
} When the main switch of the control box D2-CB is turned ON
(including restarting when the network is set, etc.), you may not be
able to access to the network for first few minutes.
This is due to that the control box D2-CB continues setting the
network-related systems after it started.
In this case, start the control box D2-CB and wait for 2-3 minutes.
} For system requirements for network connection, refer to (P.7).
4
6
b
To Next Page
Loading...
Need help?
General
