Olympus DP2-SAL - Extracting Frames from Movies; Protect Play Image

DP2-SAL
59
5
Protect play image
The image can be protected (prohibit to delete) to avoid deleting
necessary images by mistake.
Select the [Play] tab
a
.
Select the image you want to protect from the thumbnail in the lower
area of the window.
Press the [Protect] button
b
. The
icon is displayed in the thumbnail.
} You can cancel the protection by selecting the protected image and
pressing the [Protect] button
b
again.
1
2
3
4
Extracting frames from movies
If the image selected in “Selecting play images (P.57)” is a movie, the
frame currently displayed can be extracted as an image.
Select the [Play] tab
a
.
Select the movie (
(
) you want to display from the thumbnail in the
lower area of the display.
Press the
button of
b
to play the image. When the frame you
want to extract is displayed, press the
button again to pause.
Press the
button of
c
to extract the frame currently
displayed as the image.
The extracted image is saved to the specified save destination
in the following file name format. For details, refer to "Setting save
folders (P.46)".
File name: <File name of the selected movie>_<Counter>.Extension
(JPG, TIF)
} While recording movies, no other operations are available except
showing /hiding the control window and recording movies.
Be sure to stop playing movies before performing other operations.
1
2
3
4
cb
a
b
a