Olympus DP2-SAL - Setting image orientation; Setting focus indicator

DP2-SAL
37
3
Series Snap
The image can be acquired by the series snap interval as first as
possible. The series snap interval is the time from the start of acquisition
to the next acquisition.
Select the [Controller] tab
a
.
If the setting items of Submenu are not displayed, press [Submenu]
b
to open them.
Press the [Series snap] button
c
.
} Press the [Series snap] button again to stop the series snap.
} While acquiring the series snap, only Show/Hide of control window
can be operated.
Change other settings after the acquisition is completed.
1
2
3
a
b
c
4
Pause/Resume Live
Select the [Controller] tab
a
.
If the setting items of Submenu are not displayed, press [Submenu]
b
to open them.
Press the [Pause] button
c
to select Pause or Resume.
1
2
3
a
b
c