DP2-SAL
89
By connecting DP2-SAL with the control box for microscope or the microscope frame, you can use the linked functions
described below.
Linked function Explanation
Automatic scale change When the objective magnification is changed by changing the coded revolving nosepiece
or the motorized revolving nosepiece, the scale size is changed automatically according to
the magnification changed.
} The objective magnification must be inputted in advance. For inputting procedures,
refer to "Setting the microscope (P.78)".
Shutter switch Attach the hand switch for exposure (U-HSEXP) to the microscope frame. You can acquire
images while observing with the microscope.
8 Functions linked with microscope
8-1 Application conditions
You can use the linked functions when the following control box or the microscope frame is combined.
· U-CBS
· U-CBM
· BX3-CBM
· BX3-CBH
· BX3M-CB
· BX3M-CBFM
· STM7-CB
· STM7-CBA
· MX63-F
· MX63L-F
} The camera can also be connected to the microscope without connecting the hand switch for exposure U-HSEXP.
In such a case, the shutter switch function is not available.
} The camera can also be connected to the microscope without connecting the revolving nosepiece with coded
functions. In such a case, the automatic scale change function is not available.
To Next Page
Loading...
