Olympus DP2-SAL - Setting scale display

DP2-SAL
39
7
Selecting Zoom magnification / Magnification Changer
Select the [Controller] tab
a
.
If the setting items of Submenu are not displayed, press [Submenu]
b
to open them.
Press the
button of [Zoom/Mag. Changer]
c
to select the zoom
magnification / magnification changer currently in the light path.
} The contents in the selection list can be set according to the
microscope in use. For setting procedures, refer to “Setting the
microscope (P. 78)”.
1
2
3
a
b
c
8
Selecting Mirror unit
Select the [Controller] tab
a
.
If the setting items of Submenu are not displayed, press [Submenu]
b
to open them.
Press the
button of [Mirror units]
c
to select the mirror unit currently
in the light path from the list. (If the applicable coded illuminator is
combined, the mirror unit is set automatically according to the selected
mirror unit.)
} The contents in the selection list can be set according to the
microscope in use. For setting procedures, refer to “Setting the
microscope (P. 78)”.
1
2
3
a
b
c